Spring-loaded probe tips reduce the chance of “skipping” the circuit even when probing at an angle. The mechanical pressure that the user has to apply is reduced and therefore probe life is enhanced. PMK`s very fine probe tips and adapters are usable down to 0.5 mm pitch when probing QFP IC`s.
Hybrid Technology
PMK 2.5 mm miniature and 5 mm standard probes feature ceramic thin or thickfilm substrates. The resistors are laser trimmed. This technology offers high bandwidth,
fast risetimes and accurate impulse measurements. PMK Probes guarantee precise voltage stability and reading accuracy as well as signal fidelity.
Reed switch allows switchable probes bandwidth performance up to 350 MHz in 10:1 mode. Our reed switches have a breakdown voltage > 4.000 V. Another advantage is their life time with over 500.000 switching cycles
PML Series
- Small Size Ø 2.5 mm at Probe Tip
- New IC Contacting System
for 0.5 to 1.27 mm pitch
- Interchangeable Spring Contact Tip
- Coaxial Design
- Low Input Capacitance
PMS PMT PMTG PMM PMMG PMMZ PHV Series
- Modular Probe
- Coaxial Design
- Coaxial Reed Switch (switchable probes)
- New IC Contacting System for 0.8 to 1.27 mm pitch
- Interchangeable Spring Contcat Tip
PKT Series
- Cable Divider BNC to BNC
- 500 MHz System Bandwidth
- For permanent installation in applications on vibrating equipment like machines and engines
- Double HF-adjustment
3D Probe Positioners
- Handsfree Testing and Measuring
- Accurate and Safe Positioning
- Stepless 3D Clamping System
- 3 Base mount Types available
4D Boardtester
- Handsfree Testing and Measuring
- Accurate and Safe Positioning
- Variable Arrangement of the Positioners by Magnet Feet
- All Board sizes up to 300 x 340 mm can be tested with the 4D Boardtester
Micro test Accessories 0.64 mm
- QFP IC-Clips
- E-Z-Hooks
- Clamp-Type Test Probe
- Test Probes
- Measuring Leads
Test Accessories 4 mm
- Clamp-Type Test Probe
- Test Probes
- Alligator Clips
- Measuring Leads
- SMD Test Tweezer
- Kelvin Measuring Leads
